ac6-training, un département d'Ac6 SAS
 
Site affiché en Français
Site affiché en FrançaisVoir le site en English (USA)Voir le site en English (GB)
+ +
- -
Cours en ligne
 
Calendrier  Détails
Systèmes d'Exploitation
 
Calendrier  Détails
Programmation
Calendrier  Détails
Processors
Calendrier  Détails
Communications
 
 
 
Calendrier  Détails
+ +
> >
- -

ac6 >> ac6-training >> Processors >> Atmel processors >> AT91SAM3 series implementation Télécharger la page Ecrivez nous

AT4 AT91SAM3 series implementation

This course covers AT91SAM3S, AT91SAM3U and AT91SAM3N ARM-based MCU family

formateur
Objectives
  • This course has 5 main objectives:
    • Describing the hardware implementation and highlighting the pitfalls
    • Describing the ARM Cortex-M3 core architecture
    • Becoming familiar with the IDE and low level programming
    • Describing the units which are interconnected to other modules, such as clocking, interrupt controller and DMA controller, because the boot program generally has to modify the setting of these units
    • Describing independent I/O modules and their drivers.

  • Note that this course has been designed from the architecture of the most complex AT91SAM3 device, the AT91SAM3S4C.
  • Consequently, a chapter has been designed by Acsys for each possible integrated IP.
    • According to the actual reference chosen by the customer, some chapters may be removed.

  • Products and services offered by ACSYS:
    • ACSYS is able to assist the customer by providing consultancies. Typical expertises are done during board bringup, hardware schematics review, software debugging, performance tuning.
    • ACSYS has also an expertise in FreeRTOS porting and uIP /LWIP stack or Interniche stack integration.

A lot of programming examples have been developed by ACSYS to help the attendee to become familiar with the IDE he has chosen.
That is why the labs included in this course can be compiled and executed under 3 possible IDEs: IAR, Keil and GCC / Lauterbach Trace32.
A more detailed course description is available on request at training@ac6-training.com
This document is necessary to tailor the course to specific customer needs and to define the exact schedule.

  • This course provides an overview of the ARM Cortex-M3 core. Our course reference cours RM2 - Cortex-M3 implementation details the operation of this core.
  • The following courses could be of interest:
  • Cours théorique
    • Support de cours au format PDF (en anglais) et une version imprimée lors des sessions en présentiel
    • Cours dispensé via le système de visioconférence Teams (si à distance)
    • Le formateur répond aux questions des stagiaires en direct pendant la formation et fournit une assistance technique et pédagogique
  • Au début de chaque demi-journée une période est réservée à une interaction avec les stagiaires pour s'assurer que le cours répond à leurs attentes et l'adapter si nécessaire
  • Tout ingénieur ou technicien en systèmes embarqués possédant les prérequis ci-dessus.
  • Les prérequis indiqués ci-dessus sont évalués avant la formation par l'encadrement technique du stagiaire dans son entreprise, ou par le stagiaire lui-même dans le cas exceptionnel d'un stagiaire individuel.
  • Les progrès des stagiaires sont évalués par des quizz proposés en fin des sections pour vérifier que les stagiaires ont assimilé les points présentés
  • En fin de formation, une attestation et un certificat attestant que le stagiaire a suivi le cours avec succès.
    • En cas de problème dû à un manque de prérequis de la part du stagiaire, constaté lors de la formation, une formation différente ou complémentaire lui est proposée, en général pour conforter ses prérequis, en accord avec son responsable en entreprise le cas échéant.

Plan du cours

  • ARM core based architecture
  • Description of AT91SAM3N, AT91SAM3U and AT91SAM3S SoC architecture
  • Clarifying the internal data and instruction paths: AHB-lite interconnect, peripheral buses, AHB-to-APB bridge
  • Integrated memories
  • SoC mapping
  • V7-M core family
  • Core architecture
  • Programming
  • Exception behavior, exception return
  • Basic interrupt operation, micro-coded interrupt mechanism
  • Memory Protection Unit
  • Acsys covers 3 IDEs: Keil, IAR and GCC / Lauterbach.
  • Thus the customer has just to indicate which one he has chosen.
    • Getting started with the IDE
    • Parameterizing the compiler / linker
    • Creating a project from scratch
    • C start program
  • Debug architecture
  • Programming
  • Power control
  • Reset controller
  • Clocking
  • Low power modes
  • Bus matrix
  • Peripheral DMA Controller (PDC)
  • DMA Controller (DMAC), AT91SAM3U
  • Power pins
  • Pinout
  • GPIO module
  • Embedded flash memory
  • Internal SRAM
  • Internal ROM
  • High Speed MultiMedia Card Interface
  • Static Memory Controller
  • Timer counter
  • PWM
  • Real-time Timer
  • Real-time Clock
  • Watchdog timer
  • 12-bit Analog-to-Digital Converter and Programmable Gain Amplifier
  • 12-bit Analog-to-Digital Converter, ADC12B, AT91SAM3U
  • 12-bit Digital-to-Analog Converter
  • Analog Comparator Controller
  • Cyclic Redundancy Check Calculation Unit
  • Chip Identifier
  • SPI
  • Synchronous Serial Controller
  • UART
  • USART
  • Two-Wire Interface
  • USB Device FS
  • USB Device HS, AT91SAM3U
  • ISO7816 smartcard interface