Cours en ligne
Langages Logique Programmable Embarqué et Temps-Réel Safety and security Linux

Calendrier Détails

Systèmes d'Exploitation
System Workbench Android Linux RTOS Drivers

Calendrier Détails

Programmation
Méthodes Langages Safety and security Temps réel Internet Logique Programmable
Calendrier Détails

Processors
ARM Cores NXP ARM SoCs ST processors TI processors NXP Power CPUs

Calendrier Détails

Communications
Connectivity Network Storage



Calendrier Détails

Cours associés

ac6 >> ac6-training >> Communications >> Connectivity >> HDMI 1.4a

IM1 HDMI 1.4a

This course covers the HDMI multimedia interface

Objectives

The course describes the architecture of a HDMI source-cable-sink system.
An introduction to Video and Audio standards is done prior to clarifying how this standards are transported through HDMI.
The analog interface is studied in detail, particularly the TMDS specification.
The course clarifies information coding / decoding schemes.
Content protection mechanisms are explained.
Ethernet connectivity and audio return channel are also covered.
This course has been delivered to several companies developing mobile phone chipsets.

A more detailed course description is available on request at training@ac6-training.com

Prerequisites

Experience of a digital bus is recommended.

First day

INTRODUCTION TO HDMI

Digital link between audio / video source and display or video-projector
Pinout, source and sink requirements
Status exchange through VESA DDC channel
Optional HDMI Ethernet and Audio Return Channel (HEAC)
Content protection technology
Compatibility with Digital Visual Interface [DVI], adapter
Mechanical specification, connectors Type A, B, C, D and E
Dual link capability
Maximum possible bit rates

PHYSICAL LAYER

TMDS character time definition
Single-ended differential signal, definition of the swing
Sink clock recovery
Line termination and equalization
Source pre-emphasis
Source and sink TMDS characteristics, eye diagrams
I2C and CEC signal requirements
Interface testing (compliance checklist)
Lecroy QualiPHY HDMI test solution
HEAC physical layer, MLT-3 signaling
Simultaneous transmitting ARC and MLT-3 100BASE-TX signals
Differential mode and common mode transmission characteristics

SIGNALING AND ENCODING

Clock channel, pixel rate
Encoder mux
Leading and trailing guard bands and preamble
TERC4 data coding scheme
Video data coding
Purpose of auxiliary data
Error correction
Packet formats

VIDEO STREAMS

Video standard basics, SDTV, EDTV, HDTV
3D video format structure
3D transmission video formats
Video data coding 24, 30, 36 or 48 bits
Video control signals HSYNC, VSYNC
Video data decoding
Video format timing specification
Color depth requirements
Gamut-related metadata

Second day

AUDIO STREAMS

Audio basics, L-PCM coding, IEC standards
Audio sample clock capture and regeneration, N and CTS parameters
Using a CEC feedback channel to adjust the clock in the Source device
Audio, video synchronization
Audio data packetization
DST usage
HEAC audio return channel

CONTROL AND CONFIGURATION

I2C basics
The Display Data Channel [DDC] usage during configuration
VESA enhanced display data channel standard
Physical address discovery algorithm
AVI info frame
Audio info frame
E-EDID data structure
CEA extension
HDMI vendor-specific data block
DVI / HDMI device discrimination
Consumer Electronic Control
CEC command description, remote control, AV-link protocol
HEAC capability discovery and control
CDC arbitration
Channel states and transitions
Activation of an HDMI channel
HEC control for adjacent devices
Message description
Networking using 100BASE-TX
Connection to internet via home network
Switching, loop detection and removal

CONTENT PROTECTION

HDCP specification (DRM)
Authentication of devices
Computation of shared key
Multimedia contents encryption
HDCP over HDMI
ACP packets

Ce cours peut être dispensé dans notre centre de formation près de Paris,ou dans vos locaux, en France ou dans le monde entier. Il peut aussi être dispensé sous forme d'un cours en ligne, animé par un de nos formateurs.

Nos formateurs sont bilingues et assurent le cours en français ou en anglais. Les sessions inter-entreprises programmées sont ouvertes dès deux inscrits.

Pour vous enregistrer ou pour toute information supplémentaire, contactez nous par email à l'adresse info@ac6-formation.com.

Les inscriptions aux sessions de formation sont acceptées jusqu'à une semaine avant le début de la formation. Pour une inscription plus tardive nous consulter

Vous pouvez aussi remplir et nous envoyer le bulletin d'inscription

Dernière mise à jour du plan de cours : 15 novembre 2022

L'inscription à nos formations est soumise à nos Conditions Générales de Vente

Login :
Mot de passe :

New user
Forgot password?