ac6-training, un département d'Ac6 SAS
 
Site affiché en Français
Site affiché en FrançaisVoir le site en English (USA)Voir le site en English (GB)
+ +
- -
Cours en ligne
 
Calendrier  Détails
Systèmes d'Exploitation
 
Calendrier  Détails
Programmation
Calendrier  Détails
Processors
 
Calendrier  Détails
Communications
 
 
 
Calendrier  Détails
+ +
> >
- -

ac6 >> ac6-training >> Processors >> NXP ARM SoCs >> Kinetis KL26z MCU Implementation Télécharger le catalogue Télécharger la page Ecrivez nous Version imprimable

FK2 Kinetis KL26z MCU Implementation

This course covers the NXP Kinetis KL26z ultra low power MCU

formateur
Objectifs
  • This course has 4 main objectives:
    • Describing the hardware implementation
    • Describing the ARM Cortex-M0+ core architecture
    • Describing KL26Z128VLH4 microcontroller architecture
    • Becoming familiar with the IDE (KDS) and low level programming
  • Products and services offered by ACSYS:
    • ACSYS is able to assist the customer by providing consultancies.
    • Typical expertizes are done during board bring up, hardware schematics review, software debugging, performance tuning.
    • ACSYS has also an expertise in FreeRTOS or MQX porting and uIP /LWIP stack or Interniche stack integration.
A more detailed course description is available on request at formation@ac6-formation.com
This document is necessary to tailor the course to specific customer needs and to define the exact schedule.

First Day
Architecture of Kinetis MCUs
  • ARM core based architecture
  • Description of KL26z SoC architecture
The ARM Cortex-M0+ Core
  • V6-M core family
  • Core architecture
  • Thumb instruction set
  • Exception behavior
  • Basic interrupt operation, micro-coded interrupt mechanism , NVIC
Programming and Debugging with KDS and Open SDA
  • Debug interface (Open SDA)
  • Programming
Becoming Familiar with the IDE
  • Getting started with the Kinetis Development Studio (KDS) IDE
  • Parameterizing the compiler / linker
  • Creating a project from scratch
  • Cstart code
Second Day
Reset, Power and Clocking
  • Reset
  • Clocking
  • Operation modes
KL26Z Low Power Modes
  • Power and Clock gating
  • LLS (Low Leakage Stop) mode
  • VLLS (Very Low Leakage Stop modes)
  • Low Power Timer
  • Low Leakage Wakeup Unit
  • Watchdog timer (WDOG)
Internal Interconnect
  • Crossbar switch
  • Direct Memory Access
    • DMA
    • DMA Multiplexer
Third Day
Hardware Implementation
  • Power pins
  • Pinout
  • GPIO module
Integrated Memories
  • Internal Flash
  • Internal SRAM
Timers
  • Timer/PWM module (TPM)
  • Low power timer (LPTMR)
  • Periodic Interrupt Timer
  • Real Time Clock
Fourth Day
Analog Modules
  • Analog-to-digital converters (ADC)
  • Analog comparators
  • 6-bit digital-to-analog converters (DAC)
  • 12-bit digital-to-analog converters (DAC)
  • Voltage Reference VREF (opt.)
USB
  • USB Full-Speed OTG Controller
  • USB Voltage Regulator (opt.)
Connectivity and Communication
  • SPI
    • Overview and Functional description
    • Run mode
    • Low Power
  • Wait mode
  • Stop mode
  • UART
    • Functional description
    • Register Definition
  • I2C
    • Overview
    • I2C description
    • Memory map – Register definition
Human-machine interfaces
  • General purpose input/output (GPIO)
    • Functional description
    • Register Definition