Training AT91SAM3 series implementation: This course covers AT91SAM3S, AT91SAM3U and AT91SAM3N ARM-based MCU family

ac6-training, un département d'Ac6 SAS
 
Site displayed in English (USA)
Site affiché en English (USA)View the site in French
go-up

leftthintrapezium-20-0bb472 ac6 > ac6-training > Processors > Atmel processors > AT91SAM3 series implementation Inquire Download as PDF Call us Write us
AT4AT91SAM3 series implementation
This course covers AT91SAM3S, AT91SAM3U and AT91SAM3N ARM-based MCU family
Objectives
  • This course has 5 main objectives:
    • Describing the hardware implementation and highlighting the pitfalls
    • Describing the ARM Cortex-M3 core architecture
    • Becoming familiar with the IDE and low level programming
    • Describing the units which are interconnected to other modules, such as clocking, interrupt controller and DMA controller, because the boot program generally has to modify the setting of these units
    • Describing independent I/O modules and their drivers.

  • Note that this course has been designed from the architecture of the most complex AT91SAM3 device, the AT91SAM3S4C.
  • Consequently, a chapter has been designed by Acsys for each possible integrated IP.
    • According to the actual reference chosen by the customer, some chapters may be removed.

  • Products and services offered by ACSYS:
    • ACSYS is able to assist the customer by providing consultancies. Typical expertises are done during board bringup, hardware schematics review, software debugging, performance tuning.
    • ACSYS has also an expertise in FreeRTOS porting and uIP /LWIP stack or Interniche stack integration.

A lot of programming examples have been developed by ACSYS to help the attendee to become familiar with the IDE he has chosen.
That is why the labs included in this course can be compiled and executed under 3 possible IDEs: IAR, Keil and GCC / Lauterbach Trace32.
A more detailed course description is available on request at training@ac6-training.com
This document is necessary to tailor the course to specific customer needs and to define the exact schedule.

  • This course provides an overview of the ARM Cortex-M3 core. Our course reference RM2 - Cortex-M3 implementation course details the operation of this core.
  • The following courses could be of interest:
  • Theoretical course
    • PDF course material (in English) supplemented by a printed version for face-to-face courses.
    • Online courses are dispensed using the Teams video-conferencing system.
    • The trainer answers trainees' questions during the training and provide technical and pedagogical assistance.
  • At the start of each session the trainer will interact with the trainees to ensure the course fits their expectations and correct if needed
  • Any embedded systems engineer or technician with the above prerequisites.
  • The prerequisites indicated above are assessed before the training by the technical supervision of the traineein his company, or by the trainee himself in the exceptional case of an individual trainee.
  • Trainee progress is assessed by quizzes offered at the end of various sections to verify that the trainees have assimilated the points presented
  • At the end of the training, each trainee receives a certificate attesting that they have successfully completed the course.
    • In the event of a problem, discovered during the course, due to a lack of prerequisites by the trainee a different or additional training is offered to them, generally to reinforce their prerequisites,in agreement with their company manager if applicable.

Course Outline

  • ARM core based architecture
  • Description of AT91SAM3N, AT91SAM3U and AT91SAM3S SoC architecture
  • Clarifying the internal data and instruction paths: AHB-lite interconnect, peripheral buses, AHB-to-APB bridge
  • Integrated memories
  • SoC mapping
  • V7-M core family
  • Core architecture
  • Programming
  • Exception behavior, exception return
  • Basic interrupt operation, micro-coded interrupt mechanism
  • Memory Protection Unit
  • Acsys covers 3 IDEs: Keil, IAR and GCC / Lauterbach.
  • Thus the customer has just to indicate which one he has chosen.
    • Getting started with the IDE
    • Parameterizing the compiler / linker
    • Creating a project from scratch
    • C start program
  • Debug architecture
  • Programming
  • Power control
  • Reset controller
  • Clocking
  • Low power modes
  • Bus matrix
  • Peripheral DMA Controller (PDC)
  • DMA Controller (DMAC), AT91SAM3U
  • Power pins
  • Pinout
  • GPIO module
  • Embedded flash memory
  • Internal SRAM
  • Internal ROM
  • High Speed MultiMedia Card Interface
  • Static Memory Controller
  • Timer counter
  • PWM
  • Real-time Timer
  • Real-time Clock
  • Watchdog timer
  • 12-bit Analog-to-Digital Converter and Programmable Gain Amplifier
  • 12-bit Analog-to-Digital Converter, ADC12B, AT91SAM3U
  • 12-bit Digital-to-Analog Converter
  • Analog Comparator Controller
  • Cyclic Redundancy Check Calculation Unit
  • Chip Identifier
  • SPI
  • Synchronous Serial Controller
  • UART
  • USART
  • Two-Wire Interface
  • USB Device FS
  • USB Device HS, AT91SAM3U
  • ISO7816 smartcard interface
Duration
5 days
Inquiry

This course can be scheduled upon request. Click the 'Inquire' button to contact us.

More

To book a training session or for more information, please contact us on info@ac6-training.com.

Registrations are accepted till one week before the start date for scheduled classes. For late registrations, please consult us.

You can also fill and send us the registration form

This course can be provided either remotely, in our Paris training center or worldwide on your premises.

Scheduled classes are confirmed as soon as there is two confirmed bookings. Bookings are accepted until 1 week before the course start.

Booking one of our trainings is subject to our General Terms of Sales