LPC17xx microcontroller implementation Training | Ac6 Training

ac6-training, un département d'Ac6 SAS
EN
✓EnglishFrench
go-up

ac6 › ac6-training › Processors › NXP › LPC17xx microcontroller implementation
Inquire
NP2LPC17xx microcontroller implementation
This course covers NXP Cortex-M3-based LPC17XX MCU family.

Objectives

  • This course has 5 main objectives:
    • Describing the hardware implementation and highlighting the pitfalls
    • Describing the ARM Cortex-M3 core architecture
    • Becoming familiar with the IDE and low level programming
    • Describing the units which are interconnected to other modules, such as clocking, interrupt controller and DMA controller, because the boot program generally has to modify the setting of these units
    • Describing independent I/O modules and their drivers.

  • Note that this course has been designed from the architecture of the most complex LPC17XX device, the LPC1769.
  • Consequently, a chapter has been designed by Acsys for each possible integrated IP.
    • According to the actual reference chosen by the customer, some chapters may be removed.

  • Products and services offered by ACSYS:
    • ACSYS is able to assist the customer by providing consultancies. Typical expertises are done during board bringup, hardware schematics review, software debugging, performance tuning.
    • ACSYS has also an expertise in FreeRTOS porting and uIP /LWIP stack or Interniche stack integration.

A lot of programming examples have been developed by ACSYS to help the attendee to become familiar with the IDE he has chosen.
That is why the labs included in this course can be compiled and executed under 3 possible IDEs: IAR, Keil and GCC / Lauterbach Trace32.
A more detailed course description is available on request at training@ac6-training.com
This document is necessary to tailor the course to specific customer needs and to define the exact schedule.

  • Theoretical course
    • PDF material in English (printed for face-to-face); online over Teams.
    • Trainer assistance throughout.
  • Each session starts with a trainee check-in.
  • Any embedded systems engineer or technician with the above prerequisites.
  • Prerequisites are checked before the training.
  • Progress is assessed by quizzes at the end of sections.
  • Each trainee receives a completion certificate.
  • If a prerequisite gap appears, alternative or additional training is offered.

Course Outline

  • ARM core based architecture
  • Description of LPC17XX and LPC13XX SoC architecture
  • Clarifying the internal data and instruction paths: AHB-lite interconnect, peripheral buses, AHB-to-APB bridges
  • Integrated memories
  • SoC mapping
  • V7-M core family
  • Core architecture
  • Programming
  • Exception behavior, exception return
  • Basic interrupt operation, micro-coded interrupt mechanism
  • Wakeup Interrupt Controller
  • Memory Protection Unit
  • Acsys covers 3 IDEs: Keil, IAR and GCC / Lauterbach.
  • Thus the customer has just to indicate which one he has chosen
    • Getting started with the IDE
    • Creating a project from scratch
    • C start program
  • Debug interface
  • Programming
  • Power control
  • Reset
  • Clocking
  • Low power modes
  • AHB multi-layer matrix
  • DMA
  • Power pins
  • Pinout
  • GPIO module
  • External Interrupts
  • Embedded flash memory
  • On-chip static SRAM
  • Timers 0, 1, 2 and 3
  • PWM
  • Motor Control PWM
  • Quadrature Encoder Interface
  • Real Time Clock and backup registers
  • Watchdog timer
  • 12-bit Analog-to-Digital Converter
  • 10-bit Digital-to-Analog Converter
  • SPI
  • SSP interfaces
  • I2S interface
  • UART
  • I2C
  • CAN controllers
  • USB FS
  • Fast ethernet
Duration
4 days
Inquiry

This course can be scheduled upon request. Click the 'Inquire' button to contact us.

More

To book a training session or for more information, please contact us on info@ac6-training.com.

Registrations are accepted till one week before the start date for scheduled classes. For late registrations, please consult us.

You can also fill and send us the registration form

This course can be provided either remotely, in our Paris training center or worldwide on your premises.

Scheduled classes are confirmed as soon as there is two confirmed bookings. Bookings are accepted until 1 week before the course start.

Last update of course schedule: 27 June 2026

Booking one of our trainings is subject to our General Terms of Sales

Related Courses