STM32WBA (BLE 5.4) Training | Ac6 Training

ac6-training, un département d'Ac6 SAS
EN
✓EnglishFrench
go-up

ac6 › ac6-training › Processors › STM32 › STM32WBA (BLE 5.4)
Inquire
STR22STM32WBA (BLE 5.4)
This course describe the STM32 WBA (BLE 5.4)) architecture and practical examples

Objectives

  • Understand STM32WBA SoC (Cortex-M33 + single-core BLE stack).
  • Bring up CubeWBA projects and verify the BLE stack.
  • Build GAP/GATT apps (services, security, notifications).
  • Use BLE 5.x features: Extended/Periodic Advertising, Coded PHY, BLE 5.4 (PAwR, EAD).
  • Optimize throughput, latency, and low-power with RF active.
  • Prepare OTA/DFU, NVM/bonding, keys, and a production checklist.
  • Theoretical course
    • PDF material in English (printed for face-to-face); online over Teams.
    • Trainer assistance throughout.
  • Practical activities (40-50% of duration)
    • Code examples, exercises and solutions.
    • Remote: one online Linux PC per trainee, with emulated or physical board as needed.
    • Face-to-face / on-site: one PC (one per two beyond six trainees), target board and install manual as needed.
  • Downloadable preconfigured VM to redo the labs afterwards.
  • Each session starts with a trainee check-in.
  • Any embedded systems engineer or technician with the above prerequisites.
  • Prerequisites are checked before the training.
  • Progress is assessed by the trainer through the practical exercises, and by quizzes for sections without exercises.
  • Each trainee receives a completion certificate.
  • If a prerequisite gap appears, alternative or additional training is offered.

Course Outline

  • Cortex-M33 core (app + BLE stack in single core).
  • Memory map & RF shares.
  • Radio supply (SMPS/LDO).
  • TX power path & limits.
  • Board RF layout notes.
Exercise:  Stack/version check
  • CubeWBA package layout.
  • MX config for clocks/GPIO.
  • Minimal BLE app skeleton.
  • Assert/log policy.
  • Build & debug checklist.
Exercise:  App skeleton
  • HSE/LSE choices.
  • PLL to SYSCLK.
  • RF timing sources.
  • CCIPR selectors.
  • MCO for validation.
Exercise:  MCO verify
  • Roles: peripheral/central.
  • Advertising parameters.
  • Scan & connect flow.
  • PHY select (1M/2M/Coded).
  • Conn params update.
Exercise:  Peripheral advert
  • Services & characteristics.
  • UUIDs (16/128-bit).
  • Properties & CCCD.
  • MTU exchange.
  • Read/write ops.
Exercise:  Custom service
  • Pairing/bonding (LESC).
  • Passkey/Numeric Compare.
  • Re-pair vs re-use bonds.
  • Privacy (RPA) basics.
  • Key store/NVM notes.
Exercise:  Bond & resume
  • Notify vs indicate.
  • ATT_MTU & data length.
  • App buffering strategy.
  • Connection interval impact.
  • Error/retry counters.
Exercise:  Notify meter
  • Extended ADV sets.
  • PHY/Tx power per set.
  • Periodic ADV (PA sync).
  • Sync loss handling.
  • App timing notes.
Exercise:  Periodic scan
  • PAwR concept & roles.
  • Subevents & responses.
  • EAD (encrypted ADV).
  • Scheduling constraints.
  • Practical use cases.
Exercise:  PAwR demo
  • 1M vs 2M trade-offs.
  • Coded PHY (S=2/S=8).
  • TX power steps.
  • RSSI/SNR hints.
  • Basic link budget.
Exercise:  Coded PHY walk
  • Filtered scanning.
  • Auto-connect policy.
  • GATT discovery.
  • Client reads/writes.
  • Multi-link basics.
Exercise:  Simple central
  • Idle vs advertising vs connected.
  • Conn interval/latency effects.
  • PHY & Tx power impact.
  • Sleep policies & wake.
  • Measurement method.
Exercise:  Power sweep
  • App OTA over BLE.
  • Image slots & versioning.
  • Rollback basics.
  • Failure recovery plan.
  • Minimal release notes.
Exercise:  OTA update
  • Bond/key storage.
  • Privacy data handling.
  • App params in Flash.
  • Wear considerations.
  • Backup/erase policy.
Exercise:  Persist check
  • Antenna keep-outs.
  • Match network hints.
  • Crystal accuracy.
  • Tx power/regulatory.
  • Coexistence basics.
Exercise:  RSSI sweep
  • Stack version fixed.
  • BD_ADDR policy set.
  • Error counters logged.
  • Low-power numbers saved.
  • Version/CRC tags added.
Exercise:  Self-audit sheet
Duration
3 days
Inquiry

This course can be scheduled upon request. Click the 'Inquire' button to contact us.

More

To book a training session or for more information, please contact us on info@ac6-training.com.

Registrations are accepted till one week before the start date for scheduled classes. For late registrations, please consult us.

You can also fill and send us the registration form

This course can be provided either remotely, in our Paris training center or worldwide on your premises.

Scheduled classes are confirmed as soon as there is two confirmed bookings. Bookings are accepted until 1 week before the course start.

Last update of course schedule: 27 June 2026

Booking one of our trainings is subject to our General Terms of Sales

Related Courses